Approvals |
ICC ESR-1371
Autoclaved Aerated
Concrete (AAC) Block Masonry Units | Download
Report |
Evaluation Report of E-Crete
AAC Walls |
|
ACI
530-05/ASCE 5-05/TMS 402-05 |
Building Code Requirements
for Masonry Structures |
|
Underwriters' Laboratories (UL)
Design Numbers:
U916, U917, U921, U919, X901 |
Fire Test Results for AAC Walls |
To view UL reports
please click here |
|
Underwriters' Laboratories (UL)
Design Number:
U924 |
Sound Transmission Class (STC)
For AAC Walls |
Standards |
Test or Report |
Description |
ASTM C 1386
Standard Specification AAC Units
|
Standard Covers Physical Requirements of
Loadbearing Compression and Non-Loadbearing
AAC Units |
|
ASTM C 1555-03
Standard Practice for Autoclaved Aerated Concrete Masonry 1 |
Standard covers workmanship of AAC, thin bed
mortars, and exterior and interior finishes. |
|
ASTM E 119
Fire Test of Building Constructions and
Materials
|
Fire Test of Wall Assemblies (Load and Non-Loadbearing)
and Hose Stream Test. Fire Test of Floor and
Roof Assembly |
|
ASTM E 90-97, E 413-87 and C 423-99a
Sound Transmission Loss Test (STC)
|
Airborne Sound Transmission Test on Walls |
|
ASTM C-469
Modulus of Elasticity
|
Stress Strain Curve of AAC in Compression |
|
ASTM E-78
Flexural Strength
|
Flexural Test of AAC Units To Determine Flexural
Strength |
|
ASTM E-518
Flexural Bond Strength of Masonry
|
Assembly of Masonry Units Constructed as Beams |
|
ASTM E-519
Diagonal Tension Test of Masonry Assemblies
|
Full Scale AAC Walls To Determine Shear Strength |
|
ASTM C-177-85
Standard Test Method for Steady-State
Heat
Flux Measurements and Thermal Transmission Properties by Means of the Guarded
Hot Plate
Apparatus
|
A Portion of AAC Material of 12 x 12 inch
and 1 inch Thick is Placed in the Guarded Hot
Plate. It Is Subjected to a Heat Source and
Temperature Measurements are Made Until a Steady
State is Reached. This test is used to determine
experimental value as thermal conductivity
(K) on AAC
units. |
|
ASTM E-514
Test for Water Penetration and Leakage
Through Masonry
|
Full Scale Wall Assemblies Subjected to Water
Under Pressure Exposure |